Alarm Controls is proud to be part of ASSA ABLOY, more specifically part of the group based out of Phoenix, AZ, offering premium customer care, ease of ordering and short lead times that our customers have grown accustomed to over the years.
Quickly upgrade existing applications to code compliant touchless using existing wiring | Designed to work in product configurations with and without auto operator | Direct replacement for traditional “request to exit” push buttons
Plate screened “Wave To Open” | IR sensor detection range up to approximately 4″ | Bi-color Halo LED status indicators
Narrow activation zone is limited to door handle area (range 28″ to 48″) | Designed to eliminate cross-traffic activation | Cannot be deceived by placing objects under door
Product Features
● Quickly upgrade existing applications to code compliant touchless using existing wiring
● Designed to work in product configurations with and without auto operator
● Direct replacement for traditional “request to exit” push buttons
● Sensor detection range up to 4″ for applications that require precise activation
● Field-configurable bi-color (red/green) LED status indicators
● Selectable time delay 1 to 10 seconds
● Field-configurable on/off audible tones configurable via jumper
● Plate screened “Wave To Open”
● For use with swinging and sliding door applications
Product Features
Plate screened “Wave To Open”
● IR sensor detection range up to approximately 4″
● Bi-color Halo LED status indicators
● Time delay settable from 1 to 35 seconds
● Single gang stainless steel, weather resistant, vandal resistant face plate
● Part of a continuum of Safer2Open™ low-touch and touchless door hardware solutions from ASSA ABLOY
Product Features
● Narrow activation zone is limited to door handle area (range 28″ to 48″)
● Designed to eliminate cross-traffic activation
● Cannot be deceived by placing objects under door
● Immune to thermal changes
● Adjustable time delay from 1 to 60 seconds
● Built-in buzzer, can be silenced if required
● Request to exit input, keypad or card reader input
● Part of a continuum of Safer2Open™ low-touch and touchless door hardware solutions from ASSA ABLOY
Single gang or flush mount stainless steel plate | 12-key illuminated 3×4 keypad | True 10-digit operation (10 digits plus * and # keys)
Surface mounted | True 10-digit operation (10 digits plus * and # keys) | Capacity up to 100 user codes, length from 4 to 8 digits
Narrow stile mullion mount with die cast zinc alloy housing | 10-digit operation (10 digits plus * and # keys) | Operates with card only, user code and card, or user code only
Product Features
Single gang or flush mount stainless steel plate
Product Features
Surface mounted
Product Features
Narrow stile mullion mount with die cast zinc alloy housing
Single gang stainless steel wall plate | 1-1/2″ red mushroom button | Normally-open and/or normally-closed contact pairs
Plate labeled “EMERGENCY DOOR RELEASE ALARM WILL SOUND” | 5/8″ x 7/8″ red, rectangular push button | Switch mounted on either narrow or single gang plate
Mounted on double gang stainless steel wall plate | Operates on 12 or 24 VDC | 2 second nuisance delay
Product Features
● Single gang stainless steel wall plate
● 1-1/2″ red mushroom button
● Normally-open and/or normally-closed contact pairs
● Contacts rated 10A @ 35VDC or 120VAC
● Temperature range -25C to +70C
● Switch connection via screw terminals
● Switch depth 2″ behind plate
● Custom plate marking available
● Weather resistant to IP40 standards
Product Features
Plate labeled “EMERGENCY DOOR RELEASE ALARM WILL SOUND”
● 5/8″ x 7/8″ red, rectangular push button
● Switch mounted on either narrow or single gang plate
● Switch illuminated with hi-brightness LED
● Switch terminated with colored leads
● 85 dB Piezo buzzer
● SPDT latching push button
● Contacts rated 3A at 35VDC or 120VAC
● Switch operates on 12 or 24 VAC or VDC
Product Features
● Mounted on double gang stainless steel wall plate
● Operates on 12 or 24 VDC
● 2 second nuisance delay
● SPDT instant contacts for remote alarm signal
● SPDT timed contacts for unlocking doorButton labeled: “PUSH AND HOLD FOR EMERGENCY DOOR RELEASE”
● Plate screened: “ALARM WILL SOUND”
● Countdown buzzer and flashing lamp during timing mode
● 2″ square green pushbutton; illuminated with hi-brightness LED
Please reach out to us by phone or email, and we’ll make sure to help you find it.
